TLV® J3X-10-3/4 CSHAIL-J3X-10-3/4"

JX Series steam traps can be installed on various types of equipment that uses steam as a heat source. The series covers a wide range of condensate loads, from the 100's of kg/hr to several 10's of ton/hr, making this TLV®'s most widely used series of steam traps. In addition to offering compact size, continuous discharge of condensate and large condensate discharge capacities, these steam traps are equipped with an X-element air vent that provides a powerful automatic blow out function. All these qualities gathered in one trap make the JX Series ideal for steam using equipment.

TLV® Steam Trap, Free-Float® JX Series, 3/4 in Connection, Screw Connection, 220 deg C Operating Temperature, 710 kg/hr Condensate Capacity, 0.2 to 2.1 MPa Differential Pressure, Stainless Steel Trim, Ethylene Propylene Rubber/Fluorine Resin Softgoods, Iron Body, 120 mm Inlet to Outlet Length, 130 mm H x 80 mm W

• The Free Float® rises and sinks as the flow of condensate fluctuates, opening the valve to discharge condensate and closing off the valve when steam enters
• The built-in X-element (model names including 'X') functions as an air vent, discharging both cool and hot air, as a result, the steam chamber inside the equipment contains only steam, which allows the equipment to achieve optimized heating performance
• The spherical Free Float® rotates during operation, allowing any point on its surface to act as the valve seal and thus ensuring long service life
• Stainless steel models also available for increased durability
• Fail open design - the X-element is designed to fail open so that the valve remains open even in the event of failure

• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/TLV_J3X_10_3_4_Instruction_Installation_Manual.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/TLV_J3X_10_3_4_Specification_Sheet.pdf
• Video Link https://youtu.be/LobDZ2aq5nc