BRENNAN 2702-05-05-FG 45 deg Bulkhead Elbow, 5/16 in Male SAE 37 deg JIC Flare x 5/16 in Male SAE 37 deg JIC Flare
NASHVILLE, TN
Available at All Branches
Brennan 37 deg JIC tube fittings are manufactured to SAE J514 and ISO 8434-2, the recognized global standards for flare fittings. These fittings are used in two primary ways: to connect tubing that has been flared to 37 deg with a nut and sleeve, or to mate directly with another JIC fitting of the same size and seat angle. Their versatility and consistent performance have made them one of the most widely applied hydraulic connections. For tube connections, the installer flares the tube end to 37 deg, positions it against the fitting nose, and secures it between the nose and sleeve by tightening the nut. The three-piece design of body, sleeve, and nut forms a compact joint with a small sealing area, which provides low assembly torque and relatively high pressure capability. When two JIC fittings are connected, the seal forms directly between the opposing 37 deg seats without the need for a sleeve and nut. JIC adapters are also used to transition to other port styles, including SAE straight thread O-ring Boss, NPT/NPTF pipe threads, BSPP and BSPT threads, ISO 6149 ports, and metric connections. This adaptability allows JIC fittings to connect tubing, hoses, and ports across a wide range of systems worldwide. Brennan JIC fittings are available in unplated steel, zinc plated steel, zinc-nickel plated steel, brass, and stainless steel for use in different pressure, corrosion, and environmental conditions.
BRENNAN 45 deg Bulkhead Elbow, 2702-FG Series, 45 deg Elbow Fitting, 5/16 in Connection Size 1, Connection Type 1: Male SAE 37 deg JIC Flare, 5/16 in Connection Size 2, Connection Type 2: Male SAE 37 deg JIC Flare, Male JIC|Male JIC Connection, Steel, Material Construction: AISI 1045 Steel, Finish: Trivalent Zinc-Plated, 1/2-20 x 1/2-20 Thread, 0.562 in Hex, Dimension Standards: MS 51509, SAE J514, 6000 psi Maximum Operating Pressure, -65 to 500 deg F Operating Temperature, Additional Information: Corrosion-Resistant
| Additional Information | : | Corrosion-Resistant |
| Connection Size 1 | : | 5/16 in |
| Connection Size 2 | : | 5/16 in |
| Connection Type 1 | : | Male SAE 37 deg JIC Flare |
| Connection Type 2 | : | Male SAE 37 deg JIC Flare |
| Connection Type | : | Male JIC|Male JIC |
| Dimension Standards | : | MS 51509, SAE J514 |
| Finish | : | Trivalent Zinc-Plated |
| Fitting Type | : | 45 deg Elbow |
| Hex Size | : | 0.562 in |
| Material Construction | : | AISI 1045 Steel |
| Material | : | Steel |
| Maximum Operating Pressure | : | 6000 psi |
| Operating Temperature | : | -65 to 500 deg F |
| Series | : | 2702-FG Series |
| Thread Size | : | 1/2-20 x 1/2-20 |
Catalog