Contact 615-255-1818
Gates® PRO™ Series CR2 variable pressure hydraulic hoses deliver performance and reliability in a two-wire construction. Engineered for less demanding hydraulic applications, our line of professional-grade hoses are designed to balance product performance and investment for everyday uses. All sizes deliver consistent performance to SAE and EN industry specifications. Qualified with Gates® PRO™ Series and MegaCrimp® couplings, recommended for medium-pressure hydraulic with low flexure/non-flexure applications.
Gates® Hydraulic Hose, CR1 Series, Hydraulic Hose, 10 Dash, 5/8 in Inside Diameter, 0.98 in Outside Diameter, Nitrile Tube, Synthetic Rubber Cover, Two Braids of High tensile Steel Wire Reinforcement, 8 in Bend Radius, 3625 psi, Temperature High: 212 deg F, Temperature Low: -40 deg F, For Use With: MegaCrimp® Couplings (-4 through -16) (G25) Section G, Additional Information: 14500 psi Minimum Burst Pressure
| Additional Information | : | 14500 psi Minimum Burst Pressure |
| Bend Radius | : | 8 in |
| Cover Material | : | Synthetic Rubber |
| Dash Size | : | 10 |
| For Use With | : | MegaCrimp® Couplings (-4 through -16) (G25) Section G |
| Hose Type | : | Hydraulic |
| Inside Diameter | : | 5/8 in |
| Outside Diameter | : | 0.98 in |
| Pressure Rating | : | 3625 psi |
| Reinforcement | : | Two Braids of High tensile Steel Wire |
| Series | : | CR1 Series |
| Temperature High | : | 212 deg F |
| Temperature Low | : | -40 deg F |
| Tube Material | : | Nitrile |
- Tested to minimum SAE 100R2 200,000 impulse cycles
- Validated with EX couplings
Specification Sheet