Contact 615-255-1818
Viton®O-rings have a high temperature and chemical resistance to petroleum oils and fuels, mineral oils and greases, solvents, hydraulic fluids, water and steam. They have low compression set characteristics. Viton performs excellently with Air, ATF-Type A, Butane, Engine Oil, EP Lubes, Gasoline (Lead and No Lead), Grease, MIL-G 10924, MIL-L 5606, MIL-L 6082-A, SAE-90, SAE-30, Methyl Chloride, Oxygen (Cold), Ozone, Perchlorethylene, Petroleum BasedHydraulic Oil, Phosphate Ester, Pydraul, Silicone Oil, Trichlorethylene, Turpentine, Water (Freshor Salt), Wine. Viton performs well with Cellulube, Freon 12, Fuel Oil, MIL-L 2105-B, MIL-L 7808-E, Kerosene, Toluene. Viton performs poorly with Acetic Acid, Ammonia Gas, Brake Fluid, Ethanol, Ketones (MEK), Methanol, Skydrol.
GLOBAL O-RING AND SEAL O-ring, BV75 Series, System of Measurement: Imperial, 136 Dash, 1.987 in Inside Diameter, 0.103 in Thickness, 75 Durometer, FKM, Brown, -15 to 450 deg F
| Color | : | Brown |
| Dash Size | : | 136 |
| Durometer | : | 75 |
| Inside Diameter | : | 1.987 in |
| Material | : | FKM |
| Series | : | BV75 Series |
| System of Measurement | : | Imperial |
| Temperature Rating | : | -15 to 450 deg F |
| Thickness | : | 0.103 in |
- Round, mechanical gasket designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface
- One of the most common types of seals because they are inexpensive, reliable and have simple mounting requirements
- May be used in static applications, where little range of motion is required or used in dynamic applications such as rotating pump shafts and hydraulic cylinder positions
- Bisphenol-cured
- Unlimited shelf life
Specification Sheet