Parker® 5770 Series 5770 H1L5 Oil Seal, 2.938 in ID, 4.003 in OD, 3/8 in W, Rubber
NASHVILLE, TN
Available at All Branches
Parker®'s LUP, LPD, RUP and RPD Clipper® oil seal profiles are general purpose, single lip rotary shaft seals. Their materials of construction a dense outer case and soft, flexible lip are concentrically molded as a single unit. The seal's non-metallic, composite rubber/aramid fiber OD or heel, forms a leak-free, press fit in the housing, conforming to minor surface irregularities. A garter spring provides constant, uniform load of the lip on the shaft for the life of the seal. The spring keeps the elastomer lip in contact with the shaft during higher shaft speeds and also helps offset normally occurring compression set and wear of the lip material. General purpose Clipper® oil seals provide excellent retention of grease and light oil splash.
Parker® Oil Seal, 5770 Series, 2.938 in Inside Diameter, 4.003 in Outside Diameter, 3/8 in Width, 4.003 in Housing Bore, Rubber, 1 Number of Lips, 0 to 7 psi Maximum Pressure, Additional Information: -20 to 250 deg F Temperature Rating, 0.01 in Maximum Shaft-to-Bore Misalignment, 0.01 in Maximum Shaft Runout, NBR Lip
| Additional Information | : | -20 to 250 deg F Temperature Rating, 0.01 in Maximum Shaft-to-Bore Misalignment, 0.01 in Maximum Shaft Runout, NBR Lip |
| Housing Bore | : | 4.003 in |
| Inside Diameter | : | 2.938 in |
| Material | : | Rubber |
| Maximum Pressure | : | 0 to 7 psi |
| Number of Lips | : | 1 |
| Outside Diameter | : | 4.003 in |
| Series | : | 5770 Series |
| Size | : | 1/4 to 62-1/2 in |
| Width | : | 3/8 in |
