Contact 615-255-1818
The PowerBand® construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave-groove. Recommended for multiple V-belt drives exposed to pulsating or heavy shock loads which can make belts whip, turn over, slip or jump off the drive.
Gates® Super HC® PowerBand® V-Belt, 5VX Section, 149.8 in Outside Length, 3.42 in Top Width, 0.55 in Thickness, 42 deg Angle, 5 Ribs, Resists: Crack, Heat, Oil, Ethylene, -60 to 250 deg F, For Use With: Super HC® Sheaves
| Angle | : | 42 deg |
| Material | : | Ethylene |
| Number of Ribs | : | 5 |
| Outside Length | : | 149.8 in |
| Resists | : | Crack, Heat, Oil |
| Section Size | : | 5VX |
| Suitable For Use With | : | Super HC® Sheaves |
| Temperature Rating | : | -60 to 250 deg F |
| Thickness | : | 0.55 in |
| Top Width | : | 3.42 in |
- Flex-bonded cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration
- Notches molded into the belt during manufacturing increase flexibility, making this belt well-suited for drives with smaller diameter sheaves
- Patented ethylene (EPDM) material construction provides -51 to 121 deg C (-60 to 250 deg F) temperature range to resist belt cracking
- The tie band assures high-lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive
- Meets RMA oil and heat-resistant standards and static conductivity requirements