Contact 615-255-1818
Parker's hi-duty fittings are pre-assembled with the sleeve machined onto the nut. During assembly the sleeve breaks away from the nut and seals on the tubing. This unique design creates tight joints that withstand pressures of most commonly used types of tubing including seamless steel tubing, copper, brass and thermoplastic tubing. This design also provides a vibration dampener which enables joints to stand up under moderate vibration.
Parker® Connector, Connector Fitting, 5/16 in Connection Size 1, Connection Type 1: Compression, 1/4 in Connection Size 2, Connection Type 2: Male Pipe, Compression|MPT Connection, Brass, Material Construction: Brass, 0.562 in Hex, 1-1/2 in L, 1800 psi, -65 to 250 deg F
| Connection Size 1 | : | 5/16 in |
| Connection Size 2 | : | 1/4 in |
| Connection Type 1 | : | Compression |
| Connection Type 2 | : | Male Pipe |
| Connection Type | : | Compression|MPT |
| Dimensions | : | 1-1/2 in L |
| Fitting Type | : | Connector |
| Hex Size | : | 0.562 in |
| Material Construction | : | Brass |
| Material | : | Brass |
| Pressure Rating | : | 1800 psi |
| Temperature Rating | : | -65 to 250 deg F |
- No flaring, soldering or other tube preparation
- One-piece nut and sleeve reduces installation time
- Use with copper, seamless steel and thermoplastic tubing
- Steel tubing must be cold drawn and annealed seamless low carbon per SAE J524 with a maximum hardness of Rockwell B65
Catalog