Stucchi® 808124013 QDFF-808124013

The "VEP-HD" screw flat-face coupling series is another example of the continuous improvement of Stucchi® products. Designed for heavy-duty applications with high operating pressure, high impulse frequency and mechanical stress. The "VEP-HD" quick couplings are manufactured in high resistance carbon steel material treated with special nitriding treatment to increase the wear resistance of the coupling. This series has been tested to 1000000 impulse cycles. The triple valve system allows a connection of the coupling safely even in presence of high internal residual pressure and at the same time avoiding fluid loss during the connection disconnection process.

Stucchi® Flat-Faced Coupling, Series: VEP-HD Series, Coupling Fitting, 3/4 in Connection Size 1, Male Connection Type 1, 1 in Connection Size 2, SAE Code 62 O-Ring Flange Connection Type 2, Male|Flanged, Steel, Material Construction: Carbon Steel, QPQ-Plated, 1.81 x 2.16 in Hex, Dimension Standards: SAE J518, 2.31 in Dia x 6.9 in L, 550 bar Maximum Operating Pressure, -4 to 212 deg F Operating, Additional Information: Upto 750 Lpm Flow Rate

• Connection under residual pressure is allowed in both sides, the internal valve system allows an easy connection and the disconnection is included
• Flat face is easy-to-clean, reducing the inclusion of contamination to the hydraulic circuit
• Minimal fluid loss during disconnection, reducing fluid loss to the environment
• Minimal air inclusion during connection/disconnection
• Patented internal valve design creates minimal pressure drop, maintaining circuit efficiency in the system
• Internal pressure release valve system allows an easy connection with high internal residual pressure
• The modular design allows flexibility with a wide range of configurations
• High resistance at impulse pressures
• Safe and simple to use

• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/Stucchi_10WSF10_BOP_Catalog.pdf